Oil & Gas EPCM ServicesMobile skid design
Mobile Oil Separators & Treaters
During the drilling, repairing, acidizing and testing of oil wells in Iran, a large amount of oil is usually accumulated in a pit in the ground and burned. This has several economic and environmental impacts including air and soil pollution.
Oil spills penetrates into the structure of the soil and can have significant deleterious consequences for the local environment.
There are soil chemistry changes which can arise from the presence of many hazardous chemicals, even at low concentration The result can be virtual eradication of some of the primary food chain, which in turn could have major consequences for predator or consumer species.
Contaminated or polluted soil directly affects human health.
Through direct contact with soil or via inhalation of hydrocarbon vapours. Potentially greater threats are posed by the infiltration of soil contamination into groundwater aquifers used for human consumption. Sometimes even in areas apparently far removed from any apparent source of above ground contamination.
Request more information
Mobile Oil Separator (MOS)
A device for separating gas from crude oil and pumping it to the pipeline during the drilling, repairing, acidizing and testing of oil wells.
Mobile Oil Treater (MOT)
Used for eliminating acid, gas, water, salt, sand and silt from crude oil and pumping it to the pipeline during the drilling, repairing, acidizing and testing of oil wells.
Engineers for Hire
TNT Engineering is available for all projects.
We built the business with small jobs and haven’t forgotten our roots. We also accept the challenge of large projects as we service beyond our provincial borders and have an extended family of experts, personnel and suppliers at our disposal.
Mobile Oil Separator (M.O.S.)Separating gas from crude oil and pumping it to the pipeline
Mobile Oil Separator (M.O.S.)
Mobile Oil Separator (MOS) is a device for separating gas from crude oil and pumping it to the pipeline during the drilling, repairing, acidizing and testing of oil wells.
As emphasized in its name, this device is mobile and it is possible to utilize it on any needed oil well and then easily transfer and install it on another one. It is composed of three units which are installed on trailers.
Process Equipment Unit
- Two-phase separator
- Crude oil transfer pumps
- Demulsifier Package which include tank and injection pumps (can be modified to three phase separator)
- Gas oil storage tank
- Nitrogen package
- Diesel generator
- Instrument air system package (including air compressors, air dryers and air receivers).
Includes accommodations for operators and control cabin.
Mobile Oil Treater (M.O.T.)Eliminating acid, gas, water, salt, sand and silt from crude oil.
Mobile Oil Treater (M.O.T.)
Mobile Oil Treater (MOT) is a device for eliminating acid, gas, water, salt, sand and silt from crude oil and pumping it to the pipeline during the drilling, repairing, acidizing and testing of oil wells.
This device also could be utilized for different oil wells with different oil properties. As emphasized in its name, this device is mobile and it is possible to utilize it on any needed oil well and then easily transfer and install it on another one. It is composed of seven trailers.
Process Equipment Unit One
Separation of solid, sand particle, silt and three phase of oil, water and vapour. This installation contains of following main components:
- Desander & Slurry Tank (for Sand particles removal)
- 3-Phase Separator
- Desilter (for sediment particles removal)
- Choke Manifold
Process Equipment Unit Two
Treated oil from de-salter and other units are sent to second trailer to the Surge Drum to store and then pump to production plant. This package contains of following components:
- Surge Drum
- Oil Transfer Pumps
Utility trailer is used to provide utilities for all MOT packages including:
- Instrument Air Package
- Diesel Generators
- Gas Oil Storage Tank
- Gas Oil Pump
- Nitrogen Package
- Control Panel
After the separation of sediment particles from oil flow, it transfers to the de-salter in order to separate salt water from the oil emulsion in oil.
This water normally contains:
- dissolved salts
- principally chlorides of sodium
- calcium, and magnesium.
De-salting can be performed in a single stage, with high efficiency.
Injection package consist of four injection packages. Each injection package consists of a storage tank and two injection pumps.
- Caustic soda, to control oil PH and neutralize of the residual acid in oil
- Xylene, to dissolve asphaltenes
- Demulsifier, to separate water from oil
- Corrosion inhibitor
This cabin includes kitchen, accommodations, wash hand basin and water closet (flush-able toilet).
A control package is installed on a unit as control room for systematic control of oil treatment operation. All instruments units are connected to control system via connecting cables. The control system consists of:
- PLC & ESD system
- Remote I/O station which are installed in each process unit
- Engineering/operator station
- Fire capsules (fire extinguisher) are installed as required
- All trailers have fire and gas alarm systems
- PLC mechanism is Sile 3
- Backup generator and compressor